Shafts / 【Fit】GEAR Shaft fis5032 ["Slim"] ["Spin"] Clear
( 4 )

It is considerably stronger than [Air], which breaks easily if anything happens to it.
As a You-Key who has always loved high strength, I love the shape and the shaft!
For those who want a clear shaft but not an air one, this is the best item for you! I think this is the best item for those who want a clear shaft but not an air one.

However, the threaded part has become sturdier.
However, the threads have become sturdier, just as the sexy director says in the video.
However, as for the slim, I wonder if the load is on the neck part.
The thinnest part has already broken 7 threads since the end of March.
I have 2 of them. I wonder if the short length puts extra load on it?

You-Key is not flying well, hitting the board or falling off.
It may be due to the fact that I was aiming for a double fall....
I wonder if [high strength] is stronger when you take [durability] as the first point.

By the way, even though it will start at the end of March, it is still possible to use the same product at home or in a shop.
I think I throw it 2 or 3 hours a day at home or in the store.
So, please consider the situation with such frequency of use as a reference!

If you don't mind the shape
If you don't mind the shape, you might want to try the normal one or the hybrid one that comes out later.
If you don't care for the shape, you might want to try the hybrid!
If you like the center of gravity and the shape, you may choose the slim one....

I don't care which shape you choose, but I think you should try Fit Shaft GEAR at least once and see what you think.
I'd like you to try it out in your own way at least once and then make a decision.

By the way, You-Key is....

When I'm done with the one I have now, I'll go back to high-strength for now.
I'm considering using normal or hybrid!

The clear type is black. I feel that the clear ones are easier to break than the black and white ones when they are subjected to impacts such as a drop.
I thought it was difficult to compare one shaft with the other shafts, so I have made a template with my own ideas.
This is a shaft exclusively for FIT Flight, and while it is a simple shape that is attached by inserting the exclusive flight, the locking type holds the flight in place, while the spin type rotates the flight to reduce bouncing due to darts interfering with each other.
I preferred the clear coloring with lame dyeing, but I decided to use the GEAR series because the running cost of a relatively expensive FIT is too high to have many broken darts. Although there were times when they were bounced off the dartboard, I would break only one dart per month if I was unlucky, so I keep using them.
There are three types of shaft shapes, but I didn't feel the weight change that much, so I think you should choose Slim for its clean look and good hooking when you grip the shaft lightly, Hybrid if you grip the shaft lightly and dislike hooking and want lightness, and Normal if you want to emphasize strength. If you want to focus on strength, I think you should choose the normal type.
The spin type shaft rattles slightly when the flight is attached, so those who do not need it to rotate should choose the lock type.
The lengths are (1) 13mm, (2) 18mm, (3) 24mm, (4) 28.5mm, (5) 31mm, (6) 35mm, (7) 38.5mm, and (8) 42.5mm, so you can choose according to your preference.

I used to use aluminum spin shafts and was concerned about the stickiness, but now I like them because they spin smoothly.
I like it because it spins smoothly.
I have been throwing it for about a month and it has not broken yet.

The Slim Spin is my favorite shaft, and I've been using it exclusively since the Clear came out.
I know I'm not very good at it, but it breaks a lot! I'm not very good at it, but it breaks a lot!)
I use it while carrying a lot of spares.
I keep a lot of spares with me, but when it broke on the first throw, I was so depressed.)
I like the slim type, so I'm not going to change to something else, but maybe I'll try using carbon this time. ？？？？？
I'd be very happy if the current gears were a little stronger~!