Darts Other Item / 【moA】O-ring 10pcs
SPEC
| Category | Settings Parts |
|---|---|
| Maker | moA , OTHERS |
| For Setting | О Ring |
moA
O-ring 10pcs
PRICE： JPY330
Expected：USD 2.11
Expected at JPY 155.58 for 1 USD.
This exchange rate is the closing price of yesterday ( 4/25 ).
The actual exchange rate will be determined when the order is paid.
maa0011
Color
Product information
moA Oring
Loose shafts and tips are a never-ending problem for darts players.
Do you notice any looseness the moment you set up and start throwing?
Even if you tighten the O-ring with pliers, you may notice it loosening and taking away your concentration.
By attaching the O-ring to a 2BA shaft or tip, you can tighten the O-ring by hand to loosen it.
The O-ring is attached to the shaft and tip of a standard 2BA dart, and can be tightened by hand to help prevent loosening.
Tips can be attached by sliding the O-ring from the tip where it sticks into the board to the root of the threaded part.
Some shafts can be inserted from the flight side.
Basically, the O-ring is spread out from the threaded part.
Even if the shaft or tip is damaged, it can be reused as long as the O-ring itself is not broken.
Remove the O-ring with a fingernail and use it on the next shaft tip.
The O-rings are a little thinner for 2BA, but they can be used with some barrels depending on the compatibility with the barrel.
Depending on the compatibility with the barrel, the O-ring may stick out.
If you are concerned about this, please refrain from purchasing this product.
Pack of 10
Loose shafts and tips are a never-ending problem for darts players.
Do you notice any looseness the moment you set up and start throwing?
Even if you tighten the O-ring with pliers, you may notice it loosening and taking away your concentration.
By attaching the O-ring to a 2BA shaft or tip, you can tighten the O-ring by hand to loosen it.
The O-ring is attached to the shaft and tip of a standard 2BA dart, and can be tightened by hand to help prevent loosening.
Tips can be attached by sliding the O-ring from the tip where it sticks into the board to the root of the threaded part.
Some shafts can be inserted from the flight side.
Basically, the O-ring is spread out from the threaded part.
Even if the shaft or tip is damaged, it can be reused as long as the O-ring itself is not broken.
Remove the O-ring with a fingernail and use it on the next shaft tip.
The O-rings are a little thinner for 2BA, but they can be used with some barrels depending on the compatibility with the barrel.
Depending on the compatibility with the barrel, the O-ring may stick out.
If you are concerned about this, please refrain from purchasing this product.
Pack of 10
