Darts Other Item / yoa0101
( 8 )

SPEC

Category Maintenance Goods
Maker YOSHIMURA BARRELS , OTHERS
For Maintenance Barrel Care Products
yoa0101
PRICE: JPY1,320
Expected:USD 8.71

Expected at JPY 151.50 for 1 USD.

This exchange rate is the closing price of yesterday ( 3/26 ).

The actual exchange rate will be determined when the order is paid.

yoa0101

Product information

Yoshimura Barrels Barrel Magic

The ultimate barrel cleaner made with Yoshimura's special blend.
You will experience the best dirt removal you have ever experienced.

Capacity: 10g (can be used about 10 times for one set of darts)

How to use
Wash off dust and dirt from the barrel with water.
Take a small amount of Barrel Magic onto a clean cloth and rub it into the barrel to remove dirt.
Wipe with a wet cloth or rinse with water to remove the Barrel Magic.

Caution
Do not use on other parts of the barrel. Do not use on any surface other than the barrel. Wipe off immediately if it gets on special coating or painted surface. Do not use on any surface other than the barrel.
Use rubber gloves when using the product. If it gets on your skin, wash it off with water.
Keep out of reach of children.
If the product comes into contact with your eyes or adheres to your clothing, wash it immediately with plenty of water.

Japan Review

4.00

8 Reviews

3
4
0
0
1
Sort By :

2015-02-06

I was wondering after watching the video, it looked like there were no scratches on the cut.
If I had only noticed at this point...

From the results, I can't tell the difference from the abrasives sold at home centers.
I was under the impression that it was just made weaker for barrels. I was under the impression that it was just made weaker for barrels.

I thought that a breakthrough was made as far as I saw the video, but
But I thought it was just a production. The effect seemed to be

The surface becomes shiny and smooth, but the cut is weaker and the amount is less.
The price is high compared to other products...
It is expensive compared to other products...and it doesn't make things that are corroded look like new.
I had high expectations for this product because of its high reputation, but I felt betrayed.

13 people found this helpful

2015-10-01

Yes, it can be cleaned, but the width of the cleanliness depends a little on the width of the barrel.
Also, due to its compatibility with the cut, this alone will not clean micro-cut or fine-cut barrels sufficiently. The cream gets into the fine cuts and hardens into a powder, so there were some barrels that could not be cleaned with the towel alone. Specifically, the Raptor microcuts were fine, but the Green Room Starlight 4 microcuts would get into the crevices and leave a white residue. To deal with this, I recommend a melamine sponge and boiling water. If you press down on it, it will get into the gaps in the microcuts and scrape it out, and if you polish it lightly, it will remove some more of the dirt. If you cannot prepare a melamine sponge, you can remove most of the dirt by wiping it with a clean cloth or tissue after putting it in boiling water, but sometimes a little remains, so a melamine sponge is most recommended.
Also, towels are not reusable. I did it with a cheap towel, but the creamed area dried and weathered to a tattered mess over time. I recommend using a small piece of cloth that you don't need.

5 people found this helpful

2014-08-30

Today I received the product I ordered and immediately used it.
It is a wonderful cleaner, and I am not exaggerating when I say that it is the "best cleaner ever" in my subjective opinion.

The quantity is small and the price is high compared to other cleaners, but it is a cleaner that is worth the price.

I have used 2 sets (unicorn phase6/Yoshimura Magnum Type1), and they all returned the shine as good as new.
I even feel that some of them are shinier than the new ones. I even have the illusion that some of them are shining even brighter than the new ones.

I really recommend this cleaner. It is worth a try!

4 people found this helpful

2014-09-12

Here are my impressions of the actual use of the product.

First, I want to tell you, I hope you follow the product's directions to the letter! I am very happy with the product and I am very pleased with the results.

The product is a barrel cleaner.
It is a strong liquid abrasive with adhesive properties.
If you use it easily with bare hands, you may damage the skin of your hands....
When you start polishing, it changes from liquid to powder and the powder will fall off. It is better to put an old newspaper or the like under it.
I cleaned a barrel with a special coating (I don't care what happens to it) as a test. The coating actually peeled off, cleanly (lol).

Then, when you use it on a barrel with fine cut or deep cut, you should wash it off thoroughly with warm water and a cloth.

I recommend it if you really want to clean your beloved barrels.
If you want to remove surface dirt easily, paper type cleaner is enough.

4 people found this helpful

2015-07-26

I just used this on a barrel that was looking a little dull, and it's really a terrific item!
I used it on a barrel that was a little dull and it cleaned it up tremendously and restored the feel of the cut.

For 1,200 yen, I think it will be economical for those who use tungsten barrels for a longer period of use as a result!

3 people found this helpful