Tips / 【Fit Point】fit2005
( 6 )
SPEC
| Standard | 2BA |
|---|---|
| Maker | Fit Point Plus , Fit Point |
| Color | Yellow |
| Size | Standard |
Expected at JPY 155.60 for 1 USD.
This exchange rate is the closing price of yesterday ( 1/20 ).
The actual exchange rate will be determined when the order is paid.
Product information
Full of attention to detail "FIT POINT PLUS
Please experience the dramatic evolution realized by reviewing all of the materials, shape, and production specifications.
It sticks well in a variety of conditions and is hard to pull off.
Reduces bouncing and falling out in all conditions, and mitigates damage to parts!
[Remarkably anti-loosening screw].
Unique anti-loosening mechanism is adopted in the screw part.
[Hard to bend and hard to break
The design, which has been refined by confronting the material, creates a moderate elasticity and firmness, and achieves both resistance to bending and resistance to breaking!
The material was carefully selected.
With the full cooperation of material manufacturers, we have chosen the best materials from among many.
The ingenuity of the production specifications
We have achieved an unprecedented production specification that stabilizes and improves the quality! PLUS the fun of snapping it off!
Novel "PLUS" tool
If you use the "PLUS tool" on the runner part, you can easily retighten and remove the tip.
Colorful five color development.
Vivid Red, Yellow, Blue, and cool Black and White color variations!
Specifications
Total length: 25.0mm (not including the screw thread)
Weight: approx. 0.3g
Maximum diameter:5.7mm
Japan Review
4.67
6 Reviews
|
|
4 |
|
|
2 |
|
|
0 |
|
|
0 |
|
|
0 |
2016-04-17
I highly recommend it!
I have recently been playing around with matching the color of the flight with the color of the tip, so I have all 5 colors lol.
Please give them a try!
How did it all start?
I was playing at a local live, cheap, all-you-can-throw-at-it, but due to lack of maintenance, the chips from other companies didn't stick at all, and everyone was getting thrown around. But by using the Fit Point Plus, it sticks in the tip and it doesn't flick off, and it comes with a tool so it doesn't loosen up.
The disadvantage is that when you just changed it, it sticks too much and it's hard to pull it out from the board.
Now it has become an indispensable item and I always buy in bulk from Esdarts.
3 people found this helpful
2015-11-03
Purchased to match colors for sub-barrel setting
The tool is very useful!
Also this tool can be used for condor tip.
3 people found this helpful
2015-10-03
It is very firm and even if it falls and bends, it is easy to recover.
It sticks easily to D1X, Feni, Live, and Gala machines and does not sag.
When the tip is thinned by throwing Feni, it is sometimes difficult to stick to D1, but not with this.
The feel is similar to the Condor, so those with or without holes and those who put their fingers on the tip will have a different preference.
I think it's a place where preference differs.
1 people found this helpful
2016-04-16
Repeat purchase.
Tip sticks too easily and does not pull out.
Recommended for those who get frustrated when they get popped off the board. You don't have to put a lot of effort to get it out.
When you pull it out, pull it out while turning the dart to the right.
It is very easy to break for some people who throw at an angle to the board, but basically it does not break or bend.
They are inexpensive, so they are a stable tip.
1 people found this helpful
2025-01-21
Basically, you can buy the color of the tip that you like.
It sticks firmly, and even if you accidentally throw it weakly and it feels slightly stuck, it will still get caught in the hole properly.
It is hard to pull out, so it is better to pull it out while turning it firmly.
The one I used before broke easily, but I feel it is a little stronger than the one I used before.
Also, when you try to change it, you can easily remove it with the cross-shaped hole attached to the runner, so it feels like you are using the whole thing, which I think makes it easy to recommend.
Also...I personally enjoy removing the chips from the runner when I'm trying to use them, like a hobby product like plastic models, lol.
0 people found this helpful
