Darts Other Item / 【JOKERDRIVER】MAGIC WEIGHT 1.3g
SPEC
| Category | Settings Parts |
|---|---|
| Maker | JOKER DRIVER , OTHERS |
| For Setting | Weight ball |
JOKERDRIVER
MAGIC WEIGHT 1.3g
PRICE： JPY748
Expected：USD 4.81
Expected at JPY 154.95 for 1 USD.
This exchange rate is the closing price of yesterday ( 11/20 ).
The actual exchange rate will be determined when the order is paid.
joa0111
Product information
MAGIC WEIGHT
MADE IN JAPAN weight & balance adjustment weight.
Use nippers to cut the length of the weight to fit your barrel.
If you can't cut it cleanly, please use a file to adjust the length.
You can customize your barrel by combining with JOKER Adjustment Weight and JOKER SPRING.
The spring prevents the WEIGHT from moving inside the barrel during take back and release.
[Contents].
MAGIC WEIGHT / 3pcs, SPRING S-size / 3pcs
[Size]
1.3g=length19mm/max dia3.5mm/TUNGSTEN95%.
1.8g=length21mm/max dia3.6mm/TUNGSTEN95%.
All figures are hand-measured and average values. Please consider it as a guide.
2BA barrels need to be cut about half (or more depending on the barrel).
4BA (reverse thread) and NO.5 type can only be used at the back of the barrel.
It is possible to use only the bar part by cutting off the pointed part of the tip.
If it gets stuck in the barrel. Repair, replacement and warranty are not available. Please use at your own risk.
If you push it too hard, it may get stuck in the spring.
If the spring is weakened by normal use, it may get stuck.
MADE IN JAPAN weight & balance adjustment weight.
Use nippers to cut the length of the weight to fit your barrel.
If you can't cut it cleanly, please use a file to adjust the length.
You can customize your barrel by combining with JOKER Adjustment Weight and JOKER SPRING.
The spring prevents the WEIGHT from moving inside the barrel during take back and release.
[Contents].
MAGIC WEIGHT / 3pcs, SPRING S-size / 3pcs
[Size]
1.3g=length19mm/max dia3.5mm/TUNGSTEN95%.
1.8g=length21mm/max dia3.6mm/TUNGSTEN95%.
All figures are hand-measured and average values. Please consider it as a guide.
2BA barrels need to be cut about half (or more depending on the barrel).
4BA (reverse thread) and NO.5 type can only be used at the back of the barrel.
It is possible to use only the bar part by cutting off the pointed part of the tip.
If it gets stuck in the barrel. Repair, replacement and warranty are not available. Please use at your own risk.
If you push it too hard, it may get stuck in the spring.
If the spring is weakened by normal use, it may get stuck.
7
ミニ四駆とか好きな人とかの、カスタム心をくすぐるものじゃないかな。今使ってるバレルで重量調整が出来るっていう点と、手を出しやすい値段っていう点が評価できる。
