Darts Other Item / 【JOKERDRIVER】SPRING M 20mm

Main image of this product.

SPEC

Category Settings Parts
Maker JOKER DRIVER , OTHERS
For Setting Weight ball
JOKERDRIVER
SPRING M 20mm
PRICE： JPY385
Expected：USD 2.58

Expected at JPY 148.48 for 1 USD.

This exchange rate is the closing price of yesterday ( 9/4 ).

The actual exchange rate will be determined when the order is paid.

joa0122

Product information

JOKER SPRING

MADE IN JAPAN original spring made by adjusting the size and number of turns for darts.
It is designed to be used with JOKER Adjustment Weight and MAGIC WEIGHT.
The JOKER SPRING prevents the WEIGHT from moving inside the barrel during take back and release.

[How to use].
Put one of the weights inside the barrel and put the spring on top of it. All you have to do is to put the tip or shaft.

[Size]
S=10mm/0.06g
M=About 20mm/0.1g
L=about 25mm/about 0.13g

[Material].
Stainless Steel

All figures are hand-measured and average values. Please consider it as a rough estimate.
4BA(reverse thread), NO.5 type can be used only at the back of the barrel.
There is a case that it gets stuck in the barrel. Repair, replacement and warranty are not available. Please use at your own risk.
If you increase the number of WEIGHT BALL forcibly, it may be clogged in the spring.
If you increase the number of WEIGHT BALLs forcibly, they may be clogged inside the spring. Even with normal use, the spring may loosen due to deterioration and become clogged inside. In that case, we recommend you to replace them.
Each pack contains 3 pieces.