Darts Other Item / 【L-Style】GOMU
( 22 )
SPEC
Category | Settings Parts |
---|---|
Maker | L-style |
Color | White |
For Setting | О Ring |
Expected at JPY 154.94 for 1 USD.
This exchange rate is the closing price of yesterday ( 11/19 ).
The actual exchange rate will be determined when the order is paid.
Product information
L-Shaft's anti-loosening product named "GOMU" is completed (*Д´)ノ!
We developed this product to eliminate the stress caused by looseness.
The rubber is not sandwiched between the shaft and the barrel like before, so you don't have to worry about it sticking out.
We believe that the combination with Premium Lip point will make your darts more stress-free and comfortable.
Storage: 2 sets 6pcs
Japan Review
4.14
22 Reviews
|
10 |
|
7 |
|
4 |
|
0 |
|
1 |
2016-12-14
I used it with my darts friends for fun, but honestly speaking, sticker tape is sufficient.
One set of sticker tape costs 300 yen, which is too expensive.
You can use more than 50 sets of sticker tape for 100 yen.
39 people found this helpful
2016-12-03
As others have said, it is very tight when tightening.
I think you can feel the difference if the shaft is made of carbon, but if it is made of plastic, it is hard to tell the difference, and considering the cost, it doesn't make much sense.
I would recommend this product to those who are stressed by looseness.
13 people found this helpful
2017-05-08
It doesn't loosen up. That part is good. But disposable is a little bit... Also, when I remove it, the tip of the GOMU? I pointed it with a hard conversion and turned it in the opposite direction while pushing it on the threading. I used a hard conversion tool to take it off by turning it in the opposite direction while pushing it onto the threading.
If you want, I think it would be better to make a shaft with a slightly rubbery texture like Condor Flight's.
13 people found this helpful
2016-11-19
With ordinary O-rings, the protrusion of the rubber is a concern, and if you try to prevent it from protruding, you may end up with a gap between the shaft and the barrel part.
I used to use O-rings, but I think I will use this from now on.
10 people found this helpful
2016-11-30
This is my impression after buying it at a certain place on the day of release, putting it on immediately and throwing it for 4 hours.
It doesn't loose !!!!!!!!
I have always been stressed by the loosening of the screw when using carbon shafts, but after wearing the GOMU, I can say that it does not loosen at all, and I have no more stress caused by loosening.
I know they are disposable, but I don't mind that much because they come in packs of 6, and they are inexpensive, so I think they are very cost-effective.
I really recommend it to L-style users!
However, please note that they cannot be used for some manufacturers' barrels.
10 people found this helpful