Darts / 【DMC】BATRAS Phoenix
( 2 )

Main image of this product.

SPEC

Category Soft-tip Darts
Maker DMC
Materials Tungsten 90% , Stainless
Shape Straight
Cut Wing Cut
Length 43.5mm
Weight (barrel Only) 18.0g
Standard NO.5
Maximum Diameter 6.4mm
DMC
BATRAS Phoenix
PRICE： JPY19,800
Expected：USD 130.20

Expected at JPY 152.06 for 1 USD.

This exchange rate is the closing price of yesterday ( 10/31 ).

The actual exchange rate will be determined when the order is paid.

dmd3005

Product information

DMC batras
BALANCE TRANSFORMABLE SYSTEM

You can customize the center of gravity and weight at will, and if you combine different materials.
A barrel mechanism with infinite possibilities.
New Barrel Mechanism "Batras

The barrel mechanism consists of 3 parts, core shaft, front part and rear part.

The 5th installment of the BATRAS series is now available.
DMC's popular series of straight barrels, the Phoenix.

DMC BATRAS Phoenix (Phoenix)
Material: Tungsten 90%, Stainless Steel (SUS)
Weight: 13.4g~18.0g
Length (at full parts): 43.5mm
Maximum diameter (at full parts): 6.40mm
Accessories: Core Shaft W (Metal Black) x 3
Front part (Tungsten) x 3
Rear Parts (Tungsten) x 3
Front Parts (Stainless Steel) x 3
Rear Parts (Stainless Steel) x 3
Flight x3
Shaft x 3
Tip x 3
O-ring (Clear) x 3
Warranty (for core shaft only)

1.Core Shaft
Material: Tungsten / Weight: 9.7g
The core shaft is the most important part of the Butoras series.
The core shaft, made of highly durable tungsten, is compatible with parts of the Butoras Phoenix Series.
This is all you need to freely control the Butoras series for a semi-permanent period.

2. Front Parts
Material: Tungsten / Weight: 4.1g
Stainless steel / Weight: 1.8g

3.Rear part
Material: Tungsten/Weight: 4.2g
Stainless steel / Weight: 1.9g

Japan Review

5.00

2 Reviews

 2
0
0
0
0
Sort By : Top reviews | Most recent | Highest Rating >> All Review View
Sort By :

2017-07-11

I purchased this product to use both hardware and software.

It comes with SUS parts, but they are not very well made...

Just a bonus.

18g for front and rear tungsten, set up and the center of gravity is near the beginning of the rear part.

Whether you use the cut on the front side or the rear side, both fly stable.

Conversions work well with either DMC or Dynasty.

With the hard type, the cut is easily damaged due to the point hitting the barrel hard or being stuck in the barrel, but with the Butrus, it can be replaced, so there is less stress from the time of replacement until you get used to it.

However, it is a little short for me, so I would like a longer rear part.

3 people found this helpful

2021-03-26

I have bought and thrown several straight barrels, but so far this one is the easiest to throw.
The weight is just right and the cut is not too tight.
Since it is a batlass, I can continue to use it by replacing parts, so I will continue to take good care of it.

0 people found this helpful