Darts / 【YOSHIMURA BARRELS】SPARK Type3 STEEL

YOSHIMURA BARRELS
Yoshimura Barrels manufactured by Yoshimura Japan
The barrels are completely made in Japan to an accuracy of 1/100th of a percent of the original price.

Yoshimura Barrels SPARK Type3 STEEL

Yoshimura's motorcycle step technology is used
SPARK Type3" was born from the fusion of darts design

From the moment you grip the barrel, you will feel the barrel's texture, and this is where the dialogue between you and the barrel begins.

It grips as if it were sucked in and does not allow slipping.
And the good hand release is also achieved by changing the surface treatment method in the front and back.
Yoshimura's technology that brings out the control performance is concentrated here.

The core inside the barrel is left to the limit to withstand flight attacks and to enhance stability in the air.

Yoshimura's proprietary new STEEL TIP
YOSHIMURA NEEDLE" is installed as standard.
Stainless steel 440C is used and further heat-treated to increase the surface hardness to HRC58.
The shape of the tip is also carefully designed to achieve a sharp bite.
The surface of the tip is processed with the "SUPER GRAB" technique, which has been tested repeatedly in 1/100mm increments, to ensure the sharpness of the tip.
It grips the board firmly.

SPARK Type3 STEEL
■Specifications
Material: 95% tungsten
Total length: 45.0mm
Maximum diameter: 6.7mm
Barrel weight: 21.5g
Standard: Hard

Contents: 3 barrels, product certificate, inspection report

About Yoshimura Barrel Screws
The threads are set tighter than normal barrels to prevent the tips and shafts from loosening for concentrated play.