Darts / 【S4】Mugetsu Aratame Kuroshinuchi

S4 barrel MUGETSU KAIME KUROSHINUCHI


Description
The long-awaited commercialization of MUGETSU KAIME with the highest grade S4 barrel specification "KUROSHINUCHI" ver.


What is "Kuro shin-uchi"?
It is a triple process of mirror finish + coating + mirror finish.
First, a mirror finish is applied as in the case of "Shin-uchi", followed by a purple-black coating,
Then, purple-black coating is applied,
Finally, a second mirror finish is applied on top of the coating to the extent that the coating does not peel off.
The result is an unparalleled bright and lustrous mirror-finish coated barrel.
The grip is different from that of Shin-Uchi and normal coated barrels, and has a unique feel.
Please enjoy the barrels finished to a higher quality than Shin-Uchi.

The coating gradually fades and peels off as the barrel ages with use.
However, Black Shin-uchi has a mirror-finished tungsten surface under the coating, so the coating will gradually fade and peel off.
You can enjoy the aging of the barrel by using it for a long time.


(The following is a product description of MUGETSU KAIME)

This is the legitimate successor barrel of "Mugetsu" which became the face of S4 in the blink of an eye as soon as it was released in 2020.
The completely no-groove straight shape design has been retained.
The overall length, diameter, weight, and center of gravity have been changed and improved to make the barrel more suitable for experienced players.

The barrel is reversible, allowing the center of gravity to be changed from front to back.
The outer shape is symmetrical, so by reversing the setting of the tip and shaft, it is possible to change the center of gravity from the front to the rear.
You can use the barrel with either front center of gravity or back center of gravity by reversing the tip and shaft settings.
The straight barrels that allow you to change the center of gravity setting according to your taste and condition are very valuable!

When the tip is mounted on the sharp end of the barrel, the barrel will have a forward center of gravity, and when the tip is mounted on the round end of the barrel, the barrel will have a backward center of gravity.

You don't need a cut, you don't need a taper. All you can trust is your own skill.
This is the most difficult and amazing work for those who are so hardcore.


Specifications
Material: 90% tungsten
Overall length: 49.0mm
Maximum diameter:6.5mm
Barrel weight: 20.0g
Center of gravity:Front(or Rear)


Contents
Barrels x 3 (1 set)
Flight x 3 (1 set)
Shaft x 3 (1 set)
Tips x 6 (2 sets)