Shafts / 【Fit】GEAR Shaft fis6023 ["Normal"] ["Spin"] White
( 2 )

SPEC

Category Plastic Shafts
Maker Fit
Type 1 Spin
Color White
Type 2 Normal
Fit Shafts are ONLY compatible with Fit Flights
Fit
GEAR Shaft fis6023 ["Normal"] ["Spin"] White
PRICE: JPY870
Expected:USD 5.51

Expected at JPY 157.64 for 1 USD.

This exchange rate is the closing price of yesterday ( 12/19 ).

The actual exchange rate will be determined when the order is paid.

size

Displayed in Conversion to your local currency

13.0mm

18.0mm

24.0mm

28.5mm

31.0mm

35.0mm

38.5mm

42.5mm

fis6023

Product information

GEAR was previously only available in clear, but now white and D-black are finally available!

The ceramic-like appearance of the GEAR is a different beauty from the clear version.

Product Description
The "Fit Shaft GEAR" is born with all the features of the "Fit Shaft AIR" intact and further evolved! The performance of this product surpasses all others and meets every need! A wide variety of settings can be achieved!

Evolution 1: Strengthening of the screw part! 40% increase!
The screw that supports the core of the shaft requires precise design and strength. The Fit Joint is a new technology that makes it harder to break from the base of the screw, and without changing the size of the screw, it is 40% stronger than the screw part of the conventional Fit Shaft!

Evolution 2: Strengthened top section! 30% stronger!
The top portion of the Fit Series is the lifeblood of the flight and shaft. The new "Tough Top" technology has been adopted to make the top part of the shaft more resistant to breakage, resulting in a 30% increase in strength compared to the top part of conventional Fit shafts without changing the size!

Evolution 3: Special reinforced PC resin for even more power!
The shaft is a very demanding part. The plastic resin used for the material is a reinforced plastic resin specially designed for Fit Shaft GEAR that has a good balance of rigidity and flexibility to withstand impact.

Evolution 4: The distinction between lock and spin is clearer at a glance.
The top shape has been changed to make it easier to distinguish between the two types. The spin type has the same full R shape as before. The top of the lock type is flat with a matte surface finish. This makes the difference obvious and makes spare parts management smoother!

Evolution 5: 8 patterns of various lengths
8 patterns for a wide variety of good qualities to support a variety of settings. The size notation has also been redesigned with an easy-to-understand number system!
Please refer to the size list for the number system.

Evolution 6: Three series to meet your needs
Three series with a wide variety of settings! A wider variety of settings are available!

Specifications
Size: 2
Flight to Barrel (mm):18.0
Weight: 0.42
Function: Spin
Material: PC
Special Features:Specially designed for fitted flights
Color: White

Japan Review

2.50

2 Reviews

0
0
1
1
0
Sort By :

2015-03-23

Pros・Easy to attach and detach shaft and flight by using feto flight!
Cons: Easily broken! The entire flight may become unusable because it breaks at the base of the flight.
If you want to buy one, carbon is recommended.

3 people found this helpful

2012-12-19

I thought it was difficult to compare one shaft with another, so I have made a template with my own ideas.
It is a shaft exclusively for FIT flights, and while it is a simple shape that is attached by inserting a dedicated flight, the locking type holds the flight in place, while the spinning type rotates the flight to reduce bouncing due to darts interfering with each other.
I preferred the clear coloring with lame dyeing, but I decided to use the GEAR series because the running cost of a relatively expensive FIT is too high to have many broken darts. Although there were times when they were bounced off the dartboard, I would break only one dart per month if I was unlucky, so I keep using them.
There are three types of shaft shapes, but I didn't feel the weight change that much, so I think you should choose Slim for its clean look and good hooking when you grip the shaft lightly, Hybrid if you grip the shaft lightly and dislike hooking and want lightness, and Normal if you want to emphasize strength. If you want to focus on strength, I think you should choose the normal type.
The spin type shaft rattles slightly when the flight is attached, so those who do not need it to rotate should choose the lock type.
The lengths are (1) 13mm, (2) 18mm, (3) 24mm, (4) 28.5mm, (5) 31mm, (6) 35mm, (7) 38.5mm, and (8) 42.5mm, so you can choose according to your preference.

2 people found this helpful