Shafts / 【Fit】GEAR Shaft fis5001 ["Normal"] [] Clear
( 4 )

Main image of this product.

SPEC

Category Plastic Shafts
Maker Fit
Materials Pc（ Polycarbonate ）
Type 1
Color Clear
Type 2 Normal
Fit Shafts are ONLY compatible with Fit Flights
Fit
GEAR Shaft fis5001 ["Normal"] [] Clear
PRICE： JPY870
Expected：USD 5.72

Expected at JPY 151.90 for 1 USD.

This exchange rate is the closing price of yesterday ( 11/3 ).

The actual exchange rate will be determined when the order is paid.

size

Displayed in Conversion to your local currency

13.0mm

18.0mm

24.0mm

28.5mm

31.0mm

35.0mm

38.5mm

42.5mm

fis5001

Product information

The Fit Shaft GEAR is born with the same features of the Fit Shaft AIR, but with a further evolution! Its performance surpasses all others and meets all needs! A wide variety of settings are now possible!

Evolution 1: Strengthening of the screw part! 40% increase!
The screw that supports the core of the shaft requires meticulous design and strength. The Fit Joint is a new technology that makes the screw more resistant to breakage from the base of the screw, making it 40% stronger than the conventional Fit Shaft screw without changing the size!

Evolution 2: Strengthened top section! 30% stronger!
The top part of the Fit Series is the vital link between the flight and shaft. The new "Tough Top" technology prevents the top portion from breaking, making it 30% stronger than the top portion of conventional Fit shafts without changing the size!

Evolution 3: Exclusive reinforced PC resin for even more power!
The shaft is a very demanding part. The plastic resin used for the material is a reinforced plastic resin specially designed for Fit Shaft GEAR that has a good balance of rigidity and flexibility to withstand impact.

Evolution 4: Easily distinguish between lock and spin.
The top shape has been changed to make it easier to distinguish between the two types. The spin type has the same full R shape as before. For the lock type, the top is flat and only the top has a matte surface finish. This makes the difference obvious and makes spare parts management smoother!

Evolution 5: Wide variety of 8 full-length patterns
Eight different patterns of good quality are available for a variety of settings. The size notation has also been redesigned with an easy-to-understand number system!
Please refer to the size list for the number system.

Evolution 6: Three series to meet your needs
Three series with a wide variety of settings! A greater variety of settings are available!
The high prided series will be released in the summer of 2012.

Size: 1
Flight to Barrel (mm):13.0
Function: Lock
Material: PC
Special Specifications:Specially designed for fitted flights
Color: Clear

Japan Review

3.25

4 Reviews

 0
2
1
1
0
Sort By : Top reviews | Most recent | Highest Rating >> All Review View
Sort By :

2012-12-19

An improved version of the Fit shaft, the Fit shaft gear.
CosmoDarts claims that it is "very strong" but it breaks quite easily.
It is not a cheap shaft, so if it breaks, it will damage your wallet quite a bit.
The lengths range from #1 to #8, normal, slim, and medium thicknesses, and spin and lock flight retention types.
The fact that there are so many choices puts it far ahead of other shafts.
The small number of component parts means that even if you use the spin type, it does not shake catastrophically and you will not be stressed.

0 people found this helpful

2013-01-07

It will not break unless you are very careful.
There is almost no sensation of loosening of the flight.
There are many lengths to choose from, so you can find the one that fits you best.

0 people found this helpful

2012-12-22

It looks good.
I like Fit Flight and will buy again.

This length fits in my Condor flight case!!!!

0 people found this helpful

2012-12-23


There are many variations in length, so there ◎.
However, the strength is weak.
The barrel side has never broken, but the connection part of the flight side often breaks.
So the flights are sometimes useless.
I think it is a great shaft if the strength is improved.

0 people found this helpful