Shafts / 【Fit】GEAR Shaft fis6183 ["Hybrid"] [] Clear
( 1 )

Main image of this product.

SPEC

Category Plastic Shafts
Maker Fit
Materials Pc（ Polycarbonate ）
Type 1
Color Red , Clear
Type 2 Hybrid
Fit Shafts are ONLY compatible with Fit Flights
Fit
GEAR Shaft fis6183 ["Hybrid"] [] Clear
PRICE： JPY870
Expected：USD 5.61

Expected at JPY 154.95 for 1 USD.

This exchange rate is the closing price of yesterday ( 11/20 ).

The actual exchange rate will be determined when the order is paid.

size

Displayed in Conversion to your local currency

13.0mm

18.0mm

24.0mm

28.5mm

31.0mm

35.0mm

38.5mm

42.5mm

fis6183

Product information

The Fit Shaft GEAR is born with the same features of the Fit Shaft AIR, but with a further evolution! Its performance surpasses all others and meets all needs! A wide variety of settings are now possible!

Evolution 1: Strengthening of the screw part! 40% increase!
The screw that supports the core of the shaft requires precise design and strength. The Fit Joint is a new technology that makes it harder to break from the base of the screw, and without changing the size of the screw, it is 40% stronger than the screw part of the conventional Fit Shaft!

Evolution 2: Strengthened top section! 30% stronger!
The top portion of the Fit Series is the lifeblood of the flight and shaft. The new "Tough Top" technology has been adopted to make the top part of the shaft more resistant to breakage, resulting in a 30% increase in strength compared to the top part of conventional Fit shafts without changing the size!

Evolution 3: Special reinforced PC resin for even more power!
The shaft is a very demanding part. The plastic resin used for the material is a reinforced plastic resin specially designed for Fit Shaft GEAR that has a good balance of rigidity and flexibility to withstand impact.

Evolution 4: The distinction between lock and spin is clearer at a glance.
The top shape has been changed to make it easier to distinguish between the two types. The spin type has the same full R shape as before. The top of the lock type is flat with a matte surface finish. This makes the difference obvious and makes spare parts management smoother!

Evolution 5: 8 patterns of various lengths
8 patterns for a wide variety of good qualities to support a variety of settings. The size notation has also been redesigned with an easy-to-understand number system!
Please refer to the size list for the number system.

Evolution 6: Three series to meet your needs
Three series with a wide variety of settings! A wider variety of settings are available!

Specifications
Size: 1~8
Length(mm):13.0(1) 18.0(2) 24.0(3) 28.5(4) 31.0(5) 35.0(6) 38.5(7) 42.5(8)
Function: Spin, Lock, Hybrid
Material: PC
Special Specifications: Specially designed for fit flight
Color: Clear Red

Japan Review

2.00

1 Reviews

 0
0
0
1
0
Sort By : Top reviews | Most recent | Highest Rating >> All Review View
Sort By :

2013-02-20

All 3 shafts broke after 3 hours of use.
I prefer hybrid shafts because they are high strength and hard to break, but since there are no hybrids available, I bought 3 sets of gear shafts in different lengths as a trial to buy carbon, but all of them broke (red, black and blue). (Red, black, and blue) Specifically, they break cleanly at the joint with the barrel.
The gear shaft has a gap at the joint with the flight compared to the normal type, so the spin is a little bit stiff. (The O-ring can be inserted at the joint with the barrel, so it will not stick out even if an O-ring is inserted.
If you prefer a slimmer design, we recommend the high-strength version. (Carbon is also good, but it is much harder to break and more cost-effective.)
If you really want a hybrid like me, it is much cheaper to buy carbon.

In summary, the O-rings are the worst in terms of strength, but in terms of performance, they don't stick out and don't loosen. The O-rings do not stick out and do not loosen, but they do have a little bit of stickiness, so if you don't want to have a little bit of stickiness, then go for the normal type.
If you have a good rotation rate and don't want the shaft to be loose, I think the gear shaft carbon is the way to go.

3 people found this helpful