Shafts / 【Fit】GEAR Shaft fis6121 ["Hybrid"] ["Spin"] White
( 2 )
SPEC
Category | Plastic Shafts |
---|---|
Maker | Fit |
Materials | Pc( Polycarbonate ) |
Type 1 | Spin |
Color | White |
Type 2 | Hybrid |
Fit Shafts are ONLY compatible with Fit Flights |
Expected at JPY 154.94 for 1 USD.
This exchange rate is the closing price of yesterday ( 11/19 ).
The actual exchange rate will be determined when the order is paid.
size
Displayed in Conversion to your local currency
13.0mm
18.0mm
24.0mm
28.5mm
31.0mm
35.0mm
38.5mm
42.5mm
Product information
Fit Shaft GEAR Hybrid
The hybrid type is a balance between the slim type and the normal type.
It is ideal for players who want the rear side of the barrel to be heavier than the slim type but lighter than the normal type.
Also, the shaft itself is flexible to reduce damage to the flight.
Product description of Fit Shaft GEAR
The "Fit Shaft GEAR" has evolved further while maintaining the features of the "Fit Shaft AIR".
The "Fit Shaft GEAR" is born!
The performance that surpasses all others meets all needs!
A wide variety of settings can be achieved!
1. Strengthened screw part! 40% increase!
2.Strengthened top part! 30% increase!
3. Special reinforced PC resin for even more power!
4. Easily distinguish between lock and spin.
5. Wide variety of 8 full-length patterns
Japan Review
3.50
2 Reviews
|
0 |
|
1 |
|
1 |
|
0 |
|
0 |
2014-09-23
It is said that clear systems are less durable than black and white, but they are not noticeably less durable.
Even if they are thrown loose and dropped, they do not break oddly, but it is better to always have a barrel remover on hand just in case.
The variety of colors and lengths is also attractive, so it is great that it can be used for fine settings.
0 people found this helpful
2012-12-18
Is the hybrid (1) necessary? I think so, but maybe the grip position is good for those who also grip the shaft lightly and want to lighten it as much as possible?
Here is my template
This is a shaft exclusively for FIT Flight, and while it is a simple shape that is attached by inserting the exclusive flight, the locking type holds the flight in place, while the spin type rotates the flight to reduce bouncing due to darts interfering with each other.
I preferred the clear coloring with lame dyeing, but I decided to use the GEAR series because the running cost of a relatively expensive FIT is too high to have many broken darts. Although there were times when they were bounced off the dartboard, I would break only one dart per month if I was unlucky, so I keep using them.
There are three types of shaft shapes, but I didn't feel the weight change that much, so I think you should choose Slim for its clean look and good hooking when you grip the shaft lightly, Hybrid if you grip the shaft lightly and dislike hooking and want lightness, and Normal if you want to emphasize strength. If you want to focus on strength, I think you should choose the normal type.
The spin type shaft rattles slightly when the flight is attached, so those who do not need it to rotate should choose the lock type.
The lengths are (1) 13mm, (2) 18mm, (3) 24mm, (4) 28.5mm, (5) 31mm, (6) 35mm, (7) 38.5mm, and (8) 42.5mm, so you can choose according to your preference.
0 people found this helpful
SHAFTS Ranking
-
L-shaft
L Shaft fls0051 ["Slim"] []JPY 600 ( USD 3.87 )
-
L-shaft
L Shaft ["Carbon"] fls3016 ["Straight"] []JPY 2,000 ( USD 12.91 )
-
L-shaft
L Shaft ["Carbon"] fls3014 ["Straight"] []JPY 2,000 ( USD 12.91 )
-
Fit
GEAR Shaft fis6068 ["Slim"] []JPY 870 ( USD 5.61 )
-
L-shaft
L Shaft ["Carbon"] fls3013 ["Straight"] []JPY 2,000 ( USD 12.91 )
-
Fit
GEAR Shaft fis5005 ["Normal"] [] ClearJPY 870 ( USD 5.61 )