Darts Other Item / pra0001
( 2 )
SPEC
| Category | Maintenance Goods |
|---|---|
| Maker | PRO , OTHERS |
| For Maintenance | multi-tool |
Expected at JPY 156.51 for 1 USD.
This exchange rate is the closing price of yesterday ( 12/22 ).
The actual exchange rate will be determined when the order is paid.
Sold Out
Product information
This product is a dedicated tool for replacing the hybrid point (sold separately) and M3 screw to be installed on the [PRO Barrel] hybrid barrel series.
When the Hybrid Point is installed
Use oval plate for installation and removal.
Firmly fit the concave and convex inside of the circle of the plate to the vertical groove of the Hybrid Point, and push it slightly to the barrel side.
It can be installed by turning the plate slowly as if pushing it into barrel side.
When installing, be careful not to tighten the plate too tightly.
If you try to tighten it too forcefully, the plate may be bent or distorted.
If you try to tighten it too forcefully, the plate will be bent or distorted and you will not be able to tighten it.
When using M3 screws
Use the L-shaped hexagonal tool for installation and removal.
Insert the L-shaped hexagonal tool into the hole in front of the M3 screw and turn it.
When tightening the screw, it is recommended that you hold the barrel with rubber gloves or something that will prevent the barrel from slipping and keep it in place.
This will ensure a secure fit.
When tightening the screws, it is best to use a rubber glove or something to hold the barrel in place.
If you apply too much force, the hexagonal shape may be distorted.
If you use too much force, the hexagonal shape will be distorted and the screw will spin around.
Note: If the hex is not tightened all the way to the back, or if too much force is applied, the hex shape will be distorted and it will spin around, making it impossible to tighten.
Japan Review
3.00
2 Reviews
|
|
0 |
|
|
0 |
|
|
2 |
|
|
0 |
|
|
0 |
2012-05-27
It grows one centimeter and gains 2.1 grams!
What do you think that would change the balance of the barrel considerably?
If the center of gravity is too forward, won't the barrel sag? Or...
If we use 20g, won't it hurt the board as much as a hard one? I'm worried about that....
I am worried about many things...
I would like to try various things for experimentation.
I'd like to try out different kinds of products for experiments.
1 people found this helpful
2012-05-27
It is long and heavy.
Thanks to its length, it has weight, which makes it possible to have a forward center of gravity.
I actually put it on and tried throwing it, but I felt that the extra 2 grams was a huge burden.
It is a little heavy to put it on the front.
I didn't feel it drooping, but the weight was a little too heavy.
I think 1g is the right amount to increase the weight.
I think it's good to have a center of gravity in the front. I think it's good to try it once if you think it's good.
I think you will find that you don't have to use a front center of gravity.
1 people found this helpful
