Shafts / 【JOKER DRIVER】["Carbon"] jos0121

ZERO-CARBON SHAFT

The CARBON shaft proposed by JOKER DRIVER has been the talk of the town since before its release.
The "Zero-Zero-CARBON SHAFT φ5" has a new overall thickness. Of course, the size of the border between the barrel and the shaft has also been changed.
For those players who felt that the φ4.5 was too thin and a little uncomfortable because it touched the boundary between the barrel and the shaft, it is now a thickness that can be used without feeling very uncomfortable.
By making the inside of the carbon hollow, not only does it become lighter, but it also provides a threatening buoyancy that can be understood when thrown.
This is a shaft that has many possibilities in the future.
Why don't you try it while you still can?

[This is the first time I've ever used it.]
When attaching the shaft to the barrel, please do not hold the carbon part tightly with pliers. (We do not accept any return or exchange for any damage caused by the above handling.)
When replacing the spare parts, please insert the parts parallel to the carbon part.
When replacing the spare parts, please insert the parts parallel to the carbon part. ・If you can't insert the parts deeply by hand, please insert them slowly by holding the cloth.
Please note that the logo print may come off.

[spec] Material:CARBON
Material:CARBON
[Length&Weight (φ4.5)]
2-18.0mm・0.7g(S)/3-24.0mm・0.77g(IL)
4-28.5mm, 0.82g(IL)/5-31.0mm, 0.84g(M)
6-35.0mm, 0.87g(ML)/7-38.5mm, 0.92g(XL)/8-41.5mm, 0.96g(XXL)
Flight side top portion/0.31g
Barrel side threaded part / 0.28g

3 shafts, 3 spare parts each for front and rear, special remover x 1
Weight may vary slightly depending on measurement method and environment. The weight may vary slightly depending on the measurement method and environment. Weight may vary slightly depending on measurement method and environment.
Weight may vary slightly depending on measurement method and environment.
Shaft length is the length from the base of the flight insert (excluding the threaded part).
Shaft length is the length from the base of the flight insert (excluding the threaded part). 4.5 diameter parts cannot be used.