Darts / 【King’s JAPAN】Second Edition90　Laurus　2BA
( 2 )

Main image of this product.

SPEC

Category Soft-tip Darts
Maker King's JAPAN
Materials Tungsten 90%
Shape Torpedo
Cut Ring Cut , Shark Cut , Steer cut( Step cut ) , Vertical Cut , Mulch Cut
Length 40.0mm
Weight (barrel Only) 17.0g
Standard 2BA
Maximum Diameter 7.35mm
Center Of Gravity Center
King’s JAPAN
Second Edition90　Laurus　2BA
PRICE： JPY13,000
Expected：USD 84.92

Expected at JPY 153.09 for 1 USD.

This exchange rate is the closing price of yesterday ( 1/29 ).

The actual exchange rate will be determined when the order is paid.

kjd0021

Another Standard

  • 【King’s JAPAN】Second Edition90　Laurus　No.5

    No.5

Product information

King's JAPAN Second Edition90
Laurus

The concept of this development is the old-fashioned Torpedo.
17mm from the front to the maximum diameter
Maximum diameter is 12mm
Grip part is 11mm

As for the cut
The main part is cut with a U-groove in the square groove.
The main part is cut with a U-groove inside a square groove, which makes it easier to pull out than it looks.

At the rear of the shaft side, a fine shark cut is placed
It has the effect of preventing the shaft from slipping out.

The taper of the rear part is relatively short, so it is easy to handle even for beginners.

As for the №5 specification, we have lightly narrowed the shape of the front part, and the overall balance is the same as the 2BA.
However, the balance of the core thickness is in the forward direction, so the feeling of flight is sharper and you can aim at the target in a straight line.

Both types can be changed from mid-rear to rear by setting.
This is because the barrel itself is balanced in the center.
When setting the barrel, the center of gravity can be wrapped and released.

Specifications
Material: 90% Tungsten
Overall Length:40.0mm
Maximum diameter:7.35mm
Weight:17.0g
Center of Gravity:Center
Standard:2BA

Japan Review

5.00

2 Reviews

 2
0
0
0
0
Sort By : Top reviews | Most recent | Highest Rating >> All Review View
Sort By :

2015-06-13

When I was in a slump, I went from RT9 to RT5 at live shows and bought many different barrels to try.
I was still hovering around RT7, but after I got the Laurus, I was able to get back to RT9, and now I'm on the verge of reaching A-flat!
I have dry fingers and prefer a barrel with a tight cut, but the Laurus cut is exquisite, not too much and not too little.
I'm going to buy the NO5 version next and see which one suits me better.

10 people found this helpful

2015-06-24

I have been using only micro-cut barrels because I don't like solid cuts.

I think the Raul's cut is a very good cut, not too thin and not too tight!

The weight is also a little heavy at 17g, which makes for a very comfortable flight.

I recommend it!

5 people found this helpful