【Lippoint】lit0101 's Japan Review

Good points compared to other tips (Nomarl Lip, CONDOR, Fit Plus)...
(1) It really does not loosen even when tightened by hand.
　Tightening with pliers or special equipment is not necessary. However, this does not mean that it takes a lot of force to remove it.
　(2) It does not loosen even if you tighten it by hand. This is a wonder.
(2) Easy to stick regardless of board
　I tried it with LIVE2, Phoenix, and soft board for home use (PC darts).
　Even I, whose flying is not so good, can stick it without any problem.
　I think the percentage of darts played by the board will be reduced.
Easy to pull out
　The diagonal convexity of the tip tip makes it easy to pull out from the board.
　I think this is the best point for me personally. Personally, this is the best point.
　There is no such thing as having a hard time pulling it out.

I'm praising it so far, but the bad point.......
... I don't have any. As for the hardness of the tip, it is a little softer than CONDOR and Fit Plus.
Fit Plus, but on the other hand, there is no worry about the tip breaking, which is a characteristic of the Lip.
There is almost no worry about it. It is a material that will not break unless there is something wrong with it. After that, if you are the kind of person who puts your finger on the tip, this is a good choice.
If you put your finger on the tip, you may like the convexity of the tip.

Personally, I like it very much. I will replace the tip with this one.

LR screw of the greatest feature of this product.
It does not loosen as others have written.

I also have the impression that the hardness is a little harder than the conventional Lip.
This makes the Lip stronger in addition to being harder to break, which is a feature of the Lip.

Also, the tip does not fall off the board due to the small protrusion on the tip end.

I personally benefited from this protrusion.
With conventional tips, the tip tip tip was so smooth that my middle finger often slipped on the tip during takeback, causing me to lose my throw.
This protrusion prevents the finger from slipping on the tip.

However, the new tip prevents the finger from slipping on the tip.
Since it is relatively expensive for a consumable, it might be a good idea to share one with several people to try it out.
(By the way, I divided it among three people. Two of them have decided to repeat the purchase.)

The first thing I thought when I tried it on was that it was a little hard to tighten.
But once I got it on, I threw it on for about 6 hours and it didn't loosen at all!
This is amazing....

I think the cost performance is quite good without any breakage.

It is surprisingly not loose.
It sticks to the board comfortably.
Highly recommended!

I recently noticed the new lip point and purchased it (last month) and honestly can't find anything wrong with it. I honestly can't find anything bad to say about it. I think everything is perfect. To be honest, I have never had a problem with the lip loosening, so I can't rate that part. I can't rate that, because it seems there are a lot of people who have trouble with it, such as finger pain, using pliers, etc. I found a rubber sheet at a hardware store that is less than 1 mm in thickness. You can cut it into 2cm squares and store them in the case. When tightening the case, put it between the rubber sheet and tighten it, and do the same when loosening it. I recommend this.

I was most surprised that the triangle at the very tip was hardest to collapse.

They don't break easily and last a long time!

Buy this and you are sure to get a great product.
It does not break. I'm the type of person who uses it until it breaks, so even if it doesn't break, it won't stick.... It has warts so that you know when it's time to replace it, and it's well thought out, but I'm the type of person who wants to use it until it breaks, so I feel like it's a waste (lol).
That's how strong it is!

I use it all the time and like it.
Sometimes it breaks.

Basically, I am a heavy user of premium lip points. I use Fitpoint Plus occasionally because it bends easily, but I usually end up coming back to Premium Rippoint. It is also good that there are many color variations.