【TARGET】PYRO 47 MITSUMASA HOSHINO Model 's Japan Review

I thought the grip area might be a little too tight, but it's not at all! I thought it might be too much of a snag, but it is not at all! For 17g, you can feel that you are holding the barrel, especially the feeling of loosening the grip, and power is firmly transmitted to the arrow. The feel of the barrel is very good, especially the feel of the pull out.

I've tried it out and I'd like to know what you think.

The grip on the cut is very good, and the maximum diameter thickness combined with the taper angle does not cause the grip to shift during the movement from takeback to feed.
However, it also does not cause unnecessary snagging and hindrance during release.

For those who want both the security of the grip and the ease of the release, we highly recommend that you try throwing it at least once.

This is a replacement from Pyro [Blazing Shadow].
There is no major change in length, maximum diameter, or weight, and I can use it without any discomfort.
The cut is not too much, but it does not fall off either, and the specs are as stable as ever.
My personal impression is that it flies sharper than the Blazing Shadow.
Also, even if you are not looking to replace your Pyro, the center of gravity cut and the maximum diameter position are good, and I would recommend it to those who want to hold the center of gravity of the darts and those who want a thicker barrel.
If you are currently having trouble flying well with thinner barrels, you may give it a try.
As a side note, the logo on the front is still peeling off easily.

I've been using it since right after it was released.
First of all, the cut is not as hard as it looks. It is not so hard to get a good feel for the cut, but it does not fall through.
And the most attractive thing about this new model is that it is not coated with a bad quality coating. I want to use it in good condition for a long time, but if it is processed, the coating will peel off if it is cleaned poorly, so it was quite a problem.
By the way, the sandblasted finish on the front part where the logo is located seems to disappear unexpectedly easily (...;) It doesn't affect me too much because it is not a gripping area, but it might be better to consider it for those who hold the front part of the barrel quite a bit.
I think this model is very well made in terms of balance.