【Fit】GEAR Shaft fis5022 ["Slim"] [] 2 (18.0mm) Clear 's Japan Review

It is considerably stronger than [Air], which breaks easily if anything happens to it.
As a You-Key who has always loved high strength, I love the shape and the shaft!
For those who want a clear shaft but not an air one, this is the best item for you! I think this is the best item for those who want a clear shaft but not an air one.

However, the threaded part has become sturdier.
However, the threads have become sturdier, just as the sexy director says in the video.
However, as for the slim, I wonder if the load is on the neck part.
The thinnest part has already broken 7 threads since the end of March.
I have 2 of them. I wonder if the short length puts extra load on it?

You-Key is not flying well, hitting the board or falling off.
It may be due to the fact that I was aiming for a double fall....
I wonder if [high strength] is stronger when you take [durability] as the first point.

By the way, even though it will start at the end of March, it is still possible to use the same product at home or in a shop.
I think I throw it 2 or 3 hours a day at home or in the store.
So, please consider the situation with such frequency of use as a reference!

If you don't mind the shape
If you don't mind the shape, you might want to try the normal one or the hybrid one that comes out later.
If you don't care for the shape, you might want to try the hybrid!
If you like the center of gravity and the shape, you may choose the slim one....

I don't care which shape you choose, but I think you should try Fit Shaft GEAR at least once and see what you think.
I'd like you to try it out in your own way at least once and then make a decision.

By the way, You-Key is....

When I'm done with the one I have now, I'll go back to high-strength for now.
I'm considering using normal or hybrid!

The clear type is black. I feel that the clear ones are easier to break than the black and white ones when they are subjected to impacts such as a drop.
I thought it was difficult to compare one shaft with the other shafts, so I have made a template with my own ideas.
This is a shaft exclusively for FIT Flight, and while it is a simple shape that is attached by inserting the exclusive flight, the locking type holds the flight in place, while the spin type rotates the flight to reduce bouncing due to darts interfering with each other.
I preferred the clear coloring with lame dyeing, but I decided to use the GEAR series because the running cost of a relatively expensive FIT is too high to have many broken darts. Although there were times when they were bounced off the dartboard, I would break only one dart per month if I was unlucky, so I keep using them.
There are three types of shaft shapes, but I didn't feel the weight change that much, so I think you should choose Slim for its clean look and good hooking when you grip the shaft lightly, Hybrid if you grip the shaft lightly and dislike hooking and want lightness, and Normal if you want to emphasize strength. If you want to focus on strength, I think you should choose the normal type.
The spin type shaft rattles slightly when the flight is attached, so those who do not need it to rotate should choose the lock type.
The lengths are (1) 13mm, (2) 18mm, (3) 24mm, (4) 28.5mm, (5) 31mm, (6) 35mm, (7) 38.5mm, and (8) 42.5mm, so you can choose according to your preference.

This shaft is very good because there are many different lengths to choose from and you can throw it at a length that suits you. The flights are easy to install, so I highly recommend it!

The previous clearing of the air was a bit of a problem.
It was popping after about 3 days.
Considering that, this one is good.
I bought it the day it went on sale, and it hasn't broken.
They say it can be bent, but I'm not sure I'd be able to put it back in a clean way if I bent it, so I won't bend it.

There are many variations in length, so there ◎.
However, the strength is weak.
The barrel side has never broken, but the connection part of the flight side often breaks.
So the flights are sometimes useless.
I think it is a great shaft if the strength is improved.